Product testing record sheets – Playground Safety

Observation record:

The playground I have studied for my research is located at:

Equipment – Design and Manufacture Observations

1. The most common material used to produce the equipment was:

2. The most common type of joint used was:

Industrial tests that should be performed in manufacture are:

3. The equipment attachments I saw were:

Industrial tests that should be performed in manufacture are:

4. The most common type of finishing I saw was:

Industrial tests that should be performed in manufactur are:

5. The standards labelling I found on the equipment were:

Playground Design – Safety Observations

1. The type of playground surface used was:

I consider this surface to ba safe for a children's play area

Yes

2. I checked for the following dangers:

Found:
Low guard rails	Yes	No
Missing guard rails	Yes	No
Places where a child's limb could get trapped	Yes	No
Equipment too low or close to the ground	Yes	No
I consider this surface to be safe for a children's play area	Yes	No